8 Best air compressor for framing crew nailers

The best air compressor for framing crew nailers is usually determined by factors such as weight, capacity, power consumption, and noise.

We have tested and compared a wide range of air compressors and come up with the following top 8 air compressors that are ideal for framing crew nailers.

We are confident that you will find an air compressor that suits your needs from our list.

MAKITA MAC2400 2.5 HP Big Bore Air Compressor


  • Model: MAC2400
  • Weight: 80.8 pounds 
  • Voltage: 120 volt
  • Airflow capacity 4.2 CFM
  • Power source: corded electric 
  • Maximum Pressure: 2.5 HP
  • Dimension: 20 x 18 x 18.75 inches

For what reason do we love it? 

  • Makita nailing gun air compressor has a pressure of 90 PSI, and its powerful 2.5 HP 4-pole engine produces 4.2 CFM, which expands its usefulness and lower noise.
  • Iron cast pump with its big-bore chamber and cylinder is designed to give quicker recuperation time. Also can run two nail power guns.
  • Low Ampere draw diminishes frequencies of the entangled breaker at the start. 
  • The oil-lubricated pump cools the temperature, diminishes wear, and increases pump life.

Comparison of this air compressor with others 

With this Makita air compressor, you can run double nail guns because it has a high CFM capacity of 4.2 higher at 90 PSI than others which only have 2.0 CFM.

It helps in quickly filling up the tank. Its oil-lubricated pump diminishes wear more than those which are oil-free air compressors.

In other words, the design pump with a cast iron chamber has a more prominent drag and stroke for expanded pressure, less noise, and fast recovery than other air compressors, which are made up of other materials chambers.

But our team reported that the only problem is that the Makita air compressor is quite heavy due to its iron cast pump design than most air compressors of its size.


  • Oil-lubricated pump reduces wear. 
  • The Air channel of it is a modern style and has a large air filter.  
  • Top-notch construction and material intended for sturdiness.
  • It has exceptional power output for its size.


  • Heavy due to the iron cast.

For additional information about this product, please click here.

DEWALT Air Compressor Combo Kit with Brad Nailer (DWC1KIT-B-)


  • Weight: 37.2 pounds
  • Product dimension: 20x 17 x 19.5 inches
  • Style: kit
  • Power source: corded electric
  • Sound level: 95.5 Db
  • Special feature: Magazine Capacity of 100

For what reason do we love it?

  • The DWFP55126 compressor offers an SCFM of 2.6 conveyed at a 90 PSI pump with a 6 Gallon tank, and Max PSI is 165.
  • This compressor has high working pressure and is impressive for running various nailers on the double.
  • Brad nailer comes in three different styles, and the nail gun in this combo pack is incredibly light in weight and simple to utilize, and its back exhaust keeps contaminants away from the work surface.
  • The low noise level of this compressor makes it the best one. You can now rapidly work in a tranquil climate during use.

Comparison of Dewalt with other Air Compressors:

One of the best air compressors for framing crew, DEWALT has an excellent reputation because of its unique specifications. This is mainly used for commercial purposes with great PSI of 90.

But it consumes high power, which is a problem in that area where power voltage is not suitable. It has two controlled air couplers to help two clients at a time without any problem.

Our team tested it and realized that the cover incorporates a rock-solid handle, rope wrap, and control center to make the unit simple to convey just 30 Ibs for simple transportability.

The nailer gun has a 100 nail magazine capacity. Unlike other tooling brands that cut corners as a trade-off at a lower cost, this is not really in the case of the DWC1KIT-B DEWALT combo. These things make it unique and easier to use than other compressor kits available.


  • Brad nailer is delegated with a no defacing nose tip, which keeps scratches from harming the workspace.
  • Suitable for Professionals and hobbyists for framing crew.
  • DWFP 12231 brad nailer has sideloaded magazine with 100 nail magazine capacity and Has an adjustable integrated belt hook and depth of drive.
  • This combo offers two important power tools and helps perform renovation tasks efficiently with a pressure of 90 PSI.
  • The pump is fitted with a forever lubricating orientation, which occasionally wipes out the need to change the oil.


  • It takes high power consumption.

If you have any questions about this product, please click here for more information:

CRAFTSMAN Air Compressor, 6 Gallon, Pancake, Oil-Free with 13 Piece Accessory Kit (CMEC6150K)


  • Model: CMEC6150K
  • Style: Air compressor W/ accessory kit
  • Maximum pressure: 150 bars
  • Dimension: 16.5 x 16.5 x 17.88 inches
  • Weight: 32.5 pounds
  • Capacity: 6 Gallons
  • Air Flow capacity: 2.6 CFM
  • Sound level: 71 Db

For what reason do we love it?

  • This air compressor conveniently has a 6-gallon capacity that amplifies compactness and puts away air for the CRAFTSMAN air compressor.
  • With its oil-free pump, this equipment helps in framing nailing, roof nailing, etc., which increases its durability and requires no maintenance.
  • The pressure of 150 Max PSI guarantees sufficient cut-inch pressure for various uses.
  • Has 13 pieces accessory kit to eliminate extra shopping and offers a 1-year warranty on the Air compressor.

Comparison of Craftsman with other pancake compressors:

The Craftsman 6 Gallon air compressors pancake oil-free with the kit offers a ton at the cost, air capacity, power, extraordinary execution, convenience with its handle configuration, elastic feet, and extreme development than their competitors.

The craftsman 6-gallon air compressor is an incredible arrangement at $99 exposed and $149 for the kit, making it unique and more valuable among their competitors.

Our team illustrates that it also runs a rigid framing nailer and performs more flawlessly than others. It has all the esprit we want; other pancake air compressors could not take care of business, which is an extraordinary advantage.


  • Has solid materials and rubber-treated feet
  • Unable to beat the 2.6 SCFM.
  • This air compressor has enough ability to swell high-pressure travelers’ van tires.
  • It is effectively convenient with a supportive handle plan.
  • Thirteen pieces kit with compressors helps to perform different tasks.


  • Sometimes its air gets leaked; otherwise, no significant drawback is reported.

Click on this link for more information about this item.

California Steel Tank Air Compressor – Best quiet air compressor


  • Max PSI: 120 pounds per square inches
  • Dimension: ‎26 x 14 x 23 inches
  • Weight: 48 pounds
  • Capacity: 8 Gallons
  • Air Flow: 3 CFM
  • Sound level: 60 Db
  • Warranty: One year

For what reason do we love it? 

  • This ultra-calm air compressor from California Air Tools is incredible for indoor use where you need to keep the commotion down. It just produces 60 dB of sound, making it ideal for use in auto shop or the house.
  • It has a 1 HP oil-free electric engine that is vitality proficient and delivers less support and working costs. The electric engine is thermally protected to help in the expanded life expectancy of the unit.
  • This air compressor can convey a most extreme pressure of 120 PSI with an 80% duty cycle. The 80% obligation cycle implies that the air compressor can run for around 40 -60 minutes out of each hour before it needs to stop to cool off.
  • The air tank on the California Air Tools 8010 air compressor is an 8-gallon steel tank that the simple can convey to utilize conveying handle.

Comparison with other air compressors

Compared to other air compressors on the market, the California Air Tools 8010 is one of the quietest air compressor for framing crew nailers.

It’s also one of the most lightweight and portable air compressors, making it easy to move around the job site.


  • It’s lightweight and easy to move around
  • Setup is easy
  • The air compressor is very quiet
  • It’s oil-free, so there is no maintenance
  • Quick recovery time
  • The air tank is a good size


  • It gets very hot quickly.

If you’re seeking for additional details on this product, see the following link:

Makita MAC320Q Quiet Series 1


  • Max PSI: 135 pounds per square inches
  • Dimension: ‎‎19.09 x 20.08 x 15.08 inches
  • Weight: 52.5 pounds
  • Capacity: 3 Gallons
  • Sound level: 60 dB
  • Warranty: Limited One year

For what reason do we love it? 

  • The Makita MAC320Q Quiet Series 1 is a light and smaller air compressor that still offers a high degree of effectiveness.
  • This unit is oil-free, implying that you don’t need to stress overtopping it off or continually checking the level. Instead, you can simply let it run until the work is finished.
  • This unit likewise has a lower RPM than most air compressors, which implies that it makes less sound and is less disturbing.

Comparison with other air compressors:

In comparison to other best framing air compressors in this price range, the Makita MAC320Q Quiet Series 1 is a clear winner. It’s smaller, oil-free, and has a lower RPM, making it a great choice for a quiet and effective air compressor.

It’s also one of the more expensive options, but we think it’s worth the price for its quality and performance.


  • Smaller and light
  • Oil-free
  • Quiet opoerations
  • Low RPM


  • Higher price
  • Heavier – 52.5 Pounds

If you’d like to learn more about this product, please click here:

Metabo HPT Pancake Air Compressor – 6-gallon air compressor


  • Max PSI: 200 pounds per square inches
  • Dimension: ‎18.5 x 16 x 16 inches
  • Weight: 41 pounds
  • Capacity: 6 Gallons
  • Air Flow: 4 CFM
  • Sound level: 73 Db

For what reason do we love it? 

  • Metabo is an exceedingly dependable and top-of-the-line power tool brand. This specific air compressor is a genuine case of the organization’s ability to make an excellent and practical product.
  • The Metabo HPT air compressor is a lightweight and smaller unit that is anything but difficult to move around.
  • This unit is outfitted with a 6.0-gallon oil-free pump that doesn’t require customary support and is exceptionally vitality proficient.
  • The Metabo HPT air compressor has a most extreme working strain of 200 PSI, making it fit for running an assortment of pneumatic devices, for example, finish nailers, brad nailers, and framing nailers.
  • This unit is outfitted with an advanced control board that makes it simple to screen the air compressor’s pressure level and perceive how much air is left in the tank.
  • This air compressor has a low, stable level of 73 decibels, making it one of the calmer air compressors available.
  • The tank size is incredible for littler occupations, yet if you have a lot of work, you may need to stop and enable the air compressor to recharge.
  • Contrasted with other comparable units, this one is on the pricier side. Notwithstanding, given the quality and execution, we think it’s justified, despite all the trouble.

Comparison with other portable air compressors:

The Metabo HPT air compressor has many features that make it a great choice for a framing crew air compressor. It has enough power to run multiple framing nailers, finish nailers,, or multiple siding nailers.

Compared to other pancake air compressors, this Metabo air compressor is louder, which might be a problem for some. The Metabo also has a slower recovery time, so you might have to stop and wait for the air compressor to recharge if you are working on a large project.


  • Advanced control panel for easy monitoring
  • Very quiet operation
  • Plenty of power for most light carpentry applications
  • Low, stable level
  • Lightweight and smaller


  • The tank size could be larger
  • Slow recovery time

For additional information on this product, see the following link:

PORTER-CABLE 13-Piece Accessory Kit 


  • Max PSI: 150 pounds per square inches
  • Dimension: ‎19 x 18 x 20.94
  • Weight: 34 pounds
  • Capacity: 6 Gallons
  • Warranty: One year on components

For what reason do we love it? 

  • The PORTER-CABLE air compressor is an extraordinary versatile unit that doesn’t give up any power for its size.
  • It’s a smaller than normal 6-gallon unit that is light enough to move around with no issue.
  • It’s likewise outfitted with a 13-piece frill pack that will make your life a great deal simpler while you’re chipping away at work. 
  • The PORTER-CABLE air compressor is the perfect unit for your work-site needs. Whether you’re a specialist or an easygoing client, this smaller than normal air compressor is an extraordinary expansion for your instruments.

Comparison with other portable air compressors

Contrasted with other air compressors, this one has a higher PSI of 150 and can deal with a wide range of pneumatic apparatuses. It’s likewise outfitted with a simple to-peruse control board that makes it a breeze to work.

The PORTER-CABLE air compressor doesn’t have the most impressive CFM (cubic feet per moment) appraisals. This implies it might take somewhat more to fill up your tires or different things that require a great deal of air.


  • Excellent 90 days return policy
  • Affordable air compressor
  • Comes with 13 tools accessory kit


  • A manual instruction is very hard to understand

If you want to learn more about this product, go to the following URL; otherwise, please continue without delay:

BOSTITCH (BTFP02012) – Best portable air compressor


  • Max PSI: 150 pounds per square inches
  • Dimension: 17 x 17 x 19.25 inches
  • Weight: 29 lbs
  • Capacity: 6-Gallons
  • Sound level: 78.5 Db

For what reason do we love it?

  • The BTFP02012 is one of the lightest and more minor air compressors available. However, it doesn’t hold back on power.
  • It has a high proficiency motor for a simple startup in a virus climate and two all-inclusive couplers to work with various pneumatic devices.
  • It is one of the most versatile compressors and is ideal for various applications.
  • With a weight of just 29 pounds, this is one of the lightest models in our audit.

Comparison with other air compressors:

Compared to other small portable air compressors for framing nail guns in this price range, this air compressor has a high proficiency motor that makes it easy to start in cold weather.


  • Compact and one of the best lightweight design
  • Great duty cycle
  • High-efficiency motor
  • High flow regulator


  • Loudest

Our website want to provide our users in depth information so please go to the following URL if you want to learn more about this product:

Buying Guide for Best Air Compressor For Framing Crew Nailers

Choosing the right size air compressor for framing crew nailers is essential. If you use an air compressor that is too small, you may not be able to achieve the necessary pressure to power your nails properly and drive them into the wood.

It can lead to problems with the quality of your work and increase the risk of injury. In addition, using an air compressor that is too small can cause productivity issues since each crew member will need to wait longer between working on their tasks.

Ultimately, choosing the right size air compressor for your framing crew nailer requires careful consideration of your needs and an understanding how your specific tools work.

Whether you are researching models online or talking with experts at a hardware store, it is important to ensure that you have all of the information you need before making a final decision.

Ultimately, the health and safety of your team depend on it. Here are the key factors to consider when choosing an air compressor for your framing crew nailer:

1. Size of the compressor

The size of the framing nailer air compressor should be appropriate for the specific needs of your crew. For example, a small air compressor capable of producing only 2 CFM will not be sufficient if your team is running multiple guns simultaneously or performing high-volume nailing jobs.

At the same time, a large compressor that produces too much pressure could potentially cause damage and complications, leading to additional maintenance and repair costs in the long run. That’s why it is crucial to carefully evaluate your particular needs before deciding on size and power.

With this in mind, you can be sure that you’ll choose an air compressor that meets the requirements of your framing crew nailer in all respects.

2. Power requirements

One important thing to keep in mind when evaluating power requirements is that compressors vary greatly in terms of motor size, with larger motors providing both more power and longer running times.

So depending on what kind of work you plan to do with your compressor, you will want to choose one that offers enough horsepower for your specific application.

For example, if you are primarily going to be pushing brads into hardwood or cutting corrugated plastic sheeting for insulation, then a model with between 3 and 4 horsepower should be sufficient.

However, suppose you will be working on highly demanding framing jobs that require driving long screws into rigid materials like steel or hardwood beams or slitting PVC piping and copper tubes for plumbing projects.

In that case, a compressor with greater than 5 horsepower will likely be a better option. In any case, though, you will want to read up on the power requirements of your tools and choose an air compressor that meets these needs.

It is vital to consult the manufacturer’s specifications for your particular nailer to determine the specific power requirements.

Once you have this information, you can easily narrow down your search and choose an air compressor that is capable of meeting your needs while remaining within the power requirements of your tool.

3. Durability

When choosing the best air compressor for your framing crew nailers, durability is an important consideration. After all, you need an air compressor that can stand up to the rigors of daily use and still perform reliably. Here are some features to look for when assessing the durability of an air compressor: 

First, check the pump. The pump is the heart of the air compressor, and it needs to withstand a lot of wear and tear.

Look for an air compressor with a cast iron or stainless steel pump. These materials are much more durable than aluminum or plastic, and they will help extend the life of your air compressor. 

Also, check the type of pump. An oil-free pump is more likely to be durable than one that requires lubrication.

Next, take a look at the tank. The tank is another key component of the air compressor, and it needs to be able to hold up under pressure.

A good tank will be made from heavy-duty materials like steel or aluminum. If possible, try to find an air compressor with a pressure relief valve. This safety feature will help prevent the tank from rupturing if it becomes overpressurized. 

Finally, consider the overall construction of the air compressor. A well-built model will have sturdy fasteners and reinforced joints. This type of construction will help ensure that your air compressor can withstand years of heavy use. 

4. Portability

Another important consideration is how portable it is. Often, a nailer will need to be moved from one job site to another, and if your air compressor is difficult to transport, it may be difficult to use on different job sites. Here are some tips for choosing an air compressor that is easy to transport: 

Look for an air compressor with a compact design. Compact designs will help make your compressor easier to store and maneuver around the job site. 

Consider an air compressor with wheels. Wheels will make it much easier to move your compressor from one job site to another. 

Finally, try to find an air compressor with a lightweight design. A lighter model will be easier to move around and transport between job sites.

5. Air delivery and operating pressure

A good air compressor should have a high air delivery rate and adequate operating pressure.

The air delivery should be suitable for the number of crew members and the type of work they’ll be doing. For example, if you have a small crew of two or three people, you’ll need a smaller compressor with lower air delivery.

However, if you have a larger crew of four or more people, you’ll need a larger compressor with higher air delivery. The operating pressure is also important to consider.

Most compressors will have an operating pressure of around 120 pounds per square inch (psi). If you’re using a framing crew for your construction project, choose an air compressor that can deliver the right amount of air and operate at the right pressure. 3 CFM at 90 – 120 PSI is the recommended amount of air delivery for framing crew nails.

6. Tank size

The tank holds the compressed air, so it’s important to choose an air compressor with a tank that has the suitable capacity for your needs. A small 6 – 8 gallon tank is typically sufficient for most framing crew applications.

If you’re using a larger crew or working on a more significant project, you may need a larger tank. Some air compressors come with tanks ranging from 20 – 60 gallons. Choose the right size tank for your needs to ensure that your air compressor can keep up with the demand.

FAQs Of Best Air Compressors For Framing Crew Nailers